Bags of thinset mortar for your tile job, from the trowel notch the tile size calls for, back-buttering of large-format tile and the thinset bed under cement board on floors.
Units
Thinset needed
Enter the area.
Weight
Coverage
Show the math with your numbers
Trowel notch and coverage
The notch size sets how thick the mortar bed is, and so how far a bag goes. Bigger tiles need a thicker bed to fill the hollows of the tile and the floor.
Trowel
Typical tile
≈ sq ft per 50 lb bag
3/16" × 5/32" V-notch
Mosaics, up to 4"
100
1/4" × 1/4" square notch
up to 8" on the long side
90
1/4" × 3/8" square notch
up to 16" on the long side
65
1/2" × 1/2" square notch
up to 24" on the long side
42
3/4" U-notch (large slabs)
Over 24", slabs
30
These are typical figures printed on 50 lb bags of cement thinset by US makers; actual coverage changes with the substrate, how you hold the trowel and the back of the tile. The trowel picked by the calculator is a starting point: check coverage by lifting a freshly set tile.
bags = ⌈ area × (50 ÷ coverage per bag) × (1 + back-butter) × (1 + extra) ÷ bag weight ⌉
Example
200 sq ft of 12" × 24" porcelain, 1/2" × 1/2" notch, back-buttered: 200 × 50/42 × 1.2 × 1.1 = 314 lb → 7 bags. The same floor in 6" × 6" tile with a 1/4" notch: 122 lb → 3 bags.
Divide the area by the coverage of one bag with your trowel notch: about 90 sq ft per 50 lb bag with a 1/4" × 1/4" square notch, 65 with 1/4" × 3/8" and 42 with 1/2" × 1/2". Add 10% and about 20% more when you back-butter large tile. 200 sq ft of 12" × 24" tile back-buttered with a 1/2" notch takes about 7 bags.
What size trowel for 12×24 tile?
+
Usually a 1/2" × 1/2" square notch (or a 1/2" × 3/4" or slant-notch trowel), with the tile back-buttered, to reach the 95% coverage that floors in wet areas need. Lift a tile after setting it and check the back: if the ridges have not collapsed fully, go up a notch.
How many square feet does a 50 lb bag of thinset cover?
+
Between about 30 and 100 sq ft depending on the trowel: roughly 100 sq ft with a 3/16" V-notch, 90 with 1/4" × 1/4", 65 with 1/4" × 3/8", 42 with 1/2" × 1/2" and 30 with a 3/4" U-notch. Bags print their own coverage per notch size.
Do I need thinset under cement board?
+
On floors, yes: cement backer board makers require a bed of thinset (usually with a 1/4" square notch) between the subfloor and the board, plus screws. This is a second layer of thinset that many people forget to buy. On walls, the board is screwed to the studs without thinset.
Modified or unmodified thinset?
+
Polymer-modified thinset (ANSI A118.4 or A118.15) suits most porcelain and ceramic jobs over cement board or concrete. Some membranes and large-format or heavy tiles call for a specific mortar: follow the membrane or tile maker's instructions.
Last reviewed November 22, 2026. How we check our math: About FlooringMath.