Skip to content
FlooringMath
Menu

Flooring Calculator

How much laminate, vinyl plank (LVP), engineered or solid hardwood, carpet or carpet tile to buy for one room or a whole floor: boxes, waste by layout, underlayment, transition strips, baseboard and cost.

Units
1. Flooring

Floating floor: leave the expansion gap the maker specifies (usually 1/4"–3/8") at every wall.

2. Rooms
  1. Subtract an island, cabinets or a hearth

      Net area: —

    3. Product
    4. Underlayment, transitions, trim

    You need

    Enter at least one room.

    How the flooring calculator works

    boxes = ⌈ floor area × (1 + waste) ÷ sq ft per box ⌉ underlayment rolls = ⌈ floor area × 1.05 ÷ roll coverage ⌉ trim pieces = ⌈ (perimeter − doorways) × 1.10 ÷ piece length ⌉

    Plank floors are bought by the box, so the area plus waste is divided by the coverage printed on the box and rounded up. Carpet is different: it is cut from a roll of fixed width, so the calculator works out the strips for each room in both directions and keeps the cheaper one, the way a carpet estimator does. Transition strips are packed into stock lengths, because one long strip can serve two narrow doorways.

    Example

    A 12 × 14 ft living room and a 10 × 11 ft bedroom, laminate in 23.4 sq ft boxes, straight layout: 168 + 110 = 278 sq ft × 1.10 = 305.8 sq ft ÷ 23.4 = 14 boxes. With 7 1/2" planks in an 11 ft wide room and a 3/8" gap at each wall, the last row would be 3 3/4" wide.

    Waste by material and layout

    MaterialStraightDiagonalHerringboneTypical box
    Laminate10%15%18%20 sq ft
    Vinyl plank (LVP / SPC)7%12%15%22 sq ft
    Engineered hardwood10%15%18%24 sq ft
    Solid hardwood12%17%20%20 sq ft
    Carpet tile5%10%10%48 sq ft

    Box coverage varies widely by product (laminate 15–25 sq ft, LVP 18–30 sq ft): always use the number on your box. Add a little more for rooms with many corners, closets or angled walls.

    Flooring for common room sizes

    RoomAreaBoxes (20 sq ft, 10%)Carpet, 12 ft roll
    10 × 10 ft100 sq ft613.7 sq yd
    10 × 12 ft120 sq ft713.7 sq yd
    12 × 12 ft144 sq ft816.3 sq yd
    12 × 14 ft168 sq ft1019 sq yd
    14 × 16 ft224 sq ft1338 sq yd
    20 × 20 ft400 sq ft2254 sq yd

    Rooms wider than the roll need a seam and can waste a lot of carpet: a 14 ft wide room on a 12 ft roll needs a second strip for the last 2 ft. Turning the strips the other way is sometimes cheaper, which is why the calculator checks both. Need just the area? Use the square footage calculator. Measuring tips: how to measure a room.

    Frequently asked questions

    How do I calculate how much flooring I need?

    Measure each room (length × width, splitting L-shapes into rectangles), add the closets, subtract fixed cabinets or an island, then add waste: about 7–10% for planks laid straight, 15% diagonally, 18–20% for herringbone. Divide by the square feet per box and round up.

    How many boxes of laminate do I need?

    Divide the area plus waste by the box coverage. Two rooms of 12 × 14 ft and 10 × 11 ft (278 sq ft) with 10% waste need 305.8 sq ft; at 23.4 sq ft per box that is 14 boxes.

    How much extra flooring should I buy?

    For click laminate or vinyl plank laid parallel to the walls, 7–10% is enough because the offcut from one row starts the next. Solid hardwood needs 10–15% because some boards are culled. Diagonal and herringbone layouts need 15–20%. Keep one unopened box for repairs.

    How much carpet do I need for a room?

    Carpet comes off 12 ft (sometimes 13.5 or 15 ft) rolls, so you buy strips, not square feet. A 13 × 14 ft room needs two strips or one 13 ft run turned sideways: we calculate 35.3 sq yd for it. The calculator tries both directions for each room.

    Do I need underlayment?

    Laminate and floating engineered wood need a foam or cork underlayment (often with a vapor barrier over concrete) unless it is pre-attached. Most rigid-core vinyl plank already has a pad; adding another can void the warranty. Carpet always needs pad.

    How many transition strips do I need?

    One at every doorway or opening where the new floor meets another floor, and at exterior doors. A 72" or 78" strip can often be cut for two standard 36" doorways; the calculator packs openings into stock lengths.

    Which way should planks run?

    Usually parallel to the longest wall or toward the main light source. The calculator checks the width of the last row: if it would be a thin sliver, rip the first and last rows to the same width.

    Last reviewed November 22, 2026. How we check our math: About FlooringMath.