Skip to content
FlooringMath
Menu

How to Measure a Room for Flooring or Tile

A six-step method that works for any room: sketch it, split it into rectangles, measure wall to wall, add closets, subtract what stays uncovered, then add waste. With a worked example of an L-shaped living room.

What you need

A 25 ft tape measure or a laser measure, a pencil and paper (graph paper helps), and about ten minutes per room. A second person makes long measurements easier.

Step by step

  1. Sketch the floor. Draw the room from above on paper or your phone, including closets, doorways, the hall it opens onto, and anything fixed to the floor such as cabinets, an island or a hearth.
  2. Split it into simple shapes. Divide the sketch into rectangles (and, if needed, triangles or a half circle). An L-shaped room is one big rectangle minus the missing corner, or two rectangles.
  3. Measure each shape wall to wall. Measure length and width at floor level, from wall to wall (not from baseboard to baseboard). Measure in two places; walls are rarely perfectly parallel, so use the longer measurement.
  4. Add closets and doorways. Closets are their own rectangles. In a doorway, the new floor usually stops under the middle of the door, so add the door width × half the wall thickness, or simply include it in the closet or hall you measure.
  5. Subtract what will not be covered. Subtract kitchen cabinets, an island, a hearth or a built-in tub. Do not subtract a freestanding appliance, a toilet or a vanity on legs: the floor runs under them.
  6. Add up and add waste. Add the areas together, then add waste for your material and layout: about 7–10% for planks laid straight, 10% for tile in a straight grid, 15–20% for diagonal or herringbone.

Worked example

Floor plan: an 18.5 by 15 ft L-shaped living room with a 6 by 4 ft corner missing, a 5.5 by 2 ft closet, a 10 by 3.5 ft hall and a 5 by 1.5 ft hearth. 18' 6" 15' 6' × 4' missing hearth 5' × 1' 6" Living room
Not to scale. The closet (5' 6" × 2') and hall (10' × 3' 6") are measured separately.
  • Living room: 18.5 × 15 − 6 × 4 = 253.5 sq ft
  • Minus the hearth: 5 × 1.5 = 7.5 sq ft
  • Closet: 5.5 × 2 = 11 sq ft; hall: 10 × 3.5 = 35 sq ft
  • Total: 292 sq ft (32.4 sq yd). With 10% waste, order 321.2 sq ft.

Enter the same shapes in the square footage calculator (it has an L-shape and cutouts) or directly in the flooring calculator or tile calculator, which add the waste and count boxes.

Common mistakes

  • Measuring only one wall of a room that is not square: measure both ends and use the larger.
  • Forgetting closets, the hall or the area under the dishwasher.
  • Rounding down. Round each measurement up to the next inch.
  • Adding waste twice: if you round up generously, use the lower end of the waste range.

Frequently asked questions

Should I measure in feet or inches?

Measure in feet and inches (12 ft 7 in) and either convert to decimal feet (12.58 ft) or type both into the calculator as 12' 7". Rounding every wall up to the next inch is a sensible safety margin.

Do I measure to the wall or to the baseboard?

To the wall. Floating floors and tile go under or behind the baseboard (with an expansion gap for floating floors), so the floor area is the wall-to-wall area.

How do I measure a room with an angled wall?

Measure the rectangle that would exist without the angle, then subtract the triangle cut off by the angled wall: half of its two short sides multiplied together. Or enter the triangle by its three sides in the square footage calculator.

How do I measure stairs for flooring?

Measure each tread (depth × width) and each riser (height × width) and add them, plus the nosing. Stairs are usually priced per step rather than per square foot, so count the steps separately.

Last reviewed November 22, 2026. How we check our math: About FlooringMath.