Skip to content
FlooringMath
Menu

Backsplash Tile Calculator

Square feet, tiles or mosaic sheets and boxes for a kitchen backsplash: each counter run by its height, minus windows and the range, with grout, thinset and edge trim.

Units
1. Wall runs
  1. Subtract a window or the range

      Net area: —

    • Subtract a window or the range

        Net area: —

      Run length in feet, height in inches (countertop to the bottom of the upper cabinets; 18" is standard). Cutouts in inches.

      2. Tile
      3. Box, price, trim

      You need

      Enter the runs and tile size.

      How to measure a backsplash

      1. Measure each straight run of wall above the counter, corner to corner or to the end of the counter.
      2. Measure the height from the countertop to the underside of the upper cabinets (often 18"); where there are no uppers, to the height you want to stop.
      3. Behind the range: either subtract the range width (if you stop at the counter line) or add a separate run from the counter to the hood.
      4. Subtract windows. Ignore outlets and switches: the tile cut out for them is part of the waste.
      area = Σ run length × height − windows tiles = area ÷ ((L + j)(W + j) ÷ 144) × (1 + waste)

      Example

      Runs of 10 ft and 6 ft at 18" high = 24 sq ft, minus a 30" range gap (30 × 18 ÷ 144 = 3.75 sq ft) = 20.25 sq ft. With 3" × 6" subway in a brick pattern (12% waste): 176 tiles.

      Tiles per square foot and grout for 30 sq ft

      TilePer sq ft (1/16" joint)30 sq ft + 10%Unsanded grout, 30 sq ft
      3" × 6" subway7.762562.8 lb
      4" × 12" subway2.94971.9 lb
      2" × 8"8.662863.4 lb
      4" × 16"2.21731.8 lb
      4 1/4" × 4 1/4"7.742562.6 lb
      6" × 6"3.921301.9 lb

      Mosaic sheets vary: check the sheet size and the coverage printed on the box (often 0.9–1 sq ft per sheet) and type the box coverage above for an exact box count.

      Frequently asked questions

      How do I calculate tile for a backsplash?

      Measure each run of wall along the counter and multiply by the height from the countertop to the bottom of the upper cabinets (usually about 18"). Add the area behind the range if you tile up to the hood, subtract windows, and add 10% for a straight or brick layout (15–20% for herringbone). Outlets are small enough to ignore.

      How many square feet is a typical kitchen backsplash?

      Most kitchens have 20 to 40 sq ft of backsplash: 15–25 ft of counter run at 18" high, plus 6–10 sq ft if the wall behind the range is tiled to the hood.

      How many subway tiles do I need for a backsplash?

      About 7.8 tiles of 3" × 6" per sq ft with 1/16" joints. For a 20.3 sq ft backsplash that is 176 tiles with 12% waste, or 67 tiles of 4" × 12".

      How many mosaic sheets do I need?

      Mosaic sheets are about 12" × 12" but cover slightly less than 1 sq ft because of the edge joints; we use 0.96 sq ft unless your box says otherwise. A 20.3 sq ft backsplash needs 24 sheets with 10% extra.

      Do I need edge trim on a backsplash?

      Only where the tile ends in the open: the side of a run that does not meet a wall or cabinet, and the top edge if it stops below the cabinets or ceiling. Use bullnose pieces or a metal profile (about 8 ft long).

      Sanded or unsanded grout for a backsplash?

      Unsanded for joints under 1/8" (most subway tile is set with 1/16" joints), sanded for 1/8" and wider. Glass tile usually calls for unsanded or a urethane/epoxy grout that will not scratch it.

      Last reviewed November 22, 2026. How we check our math: About FlooringMath.