Panels and grid for a suspended (drop) ceiling: 2 × 2 or 2 × 4 ceiling tiles, 12 ft main tees, 4 ft and 2 ft cross tees, wall angle and hanger wire, with balanced border panels.
Every border panel is cut from a whole panel, which is why the count rounds up on each side instead of dividing the area. Main tee rows each need ⌈run ÷ 12⌉ pieces; splice offcuts only where the cross-tee slots line up.
Panels and grid for common rooms
Room
2 × 2 panels
2 × 4 panels
Main tees
4 ft tees
2 ft tees (2 × 2)
Wall angle (10 ft)
10 × 10 ft
25
15
2
12
15
4
12 × 12 ft
36
18
2
15
18
5
12 × 16 ft
48
24
4
21
24
6
14 × 20 ft
70
40
6
36
40
7
20 × 24 ft
120
60
8
55
60
9
Without spare panels; main tees along the longer side. Buy a few extra panels from the same carton run for future water stains.
Frequently asked questions
How many ceiling tiles do I need?
+
For 2 × 2 ft panels, divide the room length and width by 2, round each up (border panels are cut from whole ones) and multiply. For 2 × 4 panels, divide one side by 4 and the other by 2. A 12 × 12 ft room needs 36 panels of 2 × 2 or 18 of 2 × 4, plus a few spares.
How do I calculate drop ceiling grid?
+
Main tees (12 ft) run perpendicular to the joists, 4 ft apart. 4 ft cross tees clip between them every 2 ft; for 2 × 2 panels, 2 ft cross tees split each opening. Wall angle goes around the whole perimeter, and a hanger wire holds each main tee about every 4 ft.
What are border panels?
+
The cut panels around the edge. Center the grid so the borders on opposite walls are equal and at least half a panel wide: the calculator shows the border width it gets with balanced borders.
Which way do main tees run?
+
Across the joists, so each hanger wire can be fixed to a joist above. Tell the calculator which way the joists run.
Last reviewed November 22, 2026. How we check our math: About FlooringMath.