Skip to content
FlooringMath
Menu

Grout Calculator

Pounds and bags of grout from the tile size, joint width and tile thickness, using the real volume of the joints rather than a flat coverage figure.

Units

Grout needed

Enter area, tile and joint.

The grout formula

joint share = 1 − (L × W) ÷ ((L + j) × (W + j)) grout volume = area × 144 × joint share × depth (cubic inches) grout weight = volume × density of placed grout × (1 + extra)

We assume placed grout weighs about 1.8 kg per liter for sanded, 1.7 for unsanded and 1.6 for epoxy, in line with the density factors grout makers use in their own coverage formulas (roughly 1.6 to 1.9). The extra 10% covers what stays in the bucket and on the sponge.

Coverage of a 25 lb bag (sq ft)

Sanded grout, joint depth = tile thickness, no extra.

Tile1/16" joint1/8" joint3/16" joint1/4" joint
12" × 12" × 3/8"689347233176
12" × 24" × 3/8"917461309233
24" × 24" × 3/8"1,372689461347
18" × 18" × 3/8"1,031518347262
6" × 24" (wood look) × 3/8"553279188143
3" × 6" subway × 5/16"2801439875
4" × 12" subway × 5/16"417212144109
4" × 4" × 1/4"35017912294
6" × 6" × 5/16"416211143109
2" × 2" mosaic × 1/4"179946551
1" × 1" mosaic × 1/4"94513730

Read across a row to see how much the joint width matters: doubling the joint roughly doubles the grout. Read down a column to see the effect of tile size: small tiles have far more joint per square foot.

Coverage printed on the bag is based on the maker's own density and assumptions; if it differs a lot from ours, trust the bag for that product. Mosaic sheets often have joints a little wider than they look.

Frequently asked questions

How much grout do I need?

It depends far more on the tile size and joint width than on the area. 100 sq ft of 12" × 12" × 3/8" tile with 1/8" joints takes about 7.9 lb of sanded grout (one 10 lb or 25 lb bag), while 100 sq ft of 1" mosaic can take 40 lb or more. Use the calculator or the coverage table.

How many square feet does a 25 lb bag of grout cover?

Anywhere from about 30 sq ft (1" mosaic with 1/4" joints) to over 1,000 sq ft (24" × 24" tile with 1/16" joints). See the coverage table on this page for common combinations.

What is the formula for grout?

Grout volume = area × the share of the surface that is joint × the joint depth. For L × W tile with joint j, that share is 1 − L·W ÷ ((L + j)(W + j)). Multiply the volume by the density of placed grout (about 1.6–1.9 kg per liter) to get the weight. Manufacturers publish the same idea as (L + W) ÷ (L × W) × j × depth × a density factor.

Sanded or unsanded grout?

Sanded grout for joints of 1/8" and wider: the sand stops shrinking and cracking. Unsanded for joints under 1/8", polished stone and glass that sand could scratch. Epoxy and urethane grouts work across most widths and resist stains, at a higher price.

How deep is the grout joint?

Grout should fill the joint to nearly the full tile thickness; the thinset should not squeeze up more than about two thirds of the joint depth. That is why the calculator uses the tile thickness as the depth.

Last reviewed November 22, 2026. How we check our math: About FlooringMath.