How the paver calculator works
A paver patio is a layered system, and each layer is calculated on its own terms:
- Pavers: area ÷ (paver length + joint) × (paver width + joint), plus waste for the pattern. Pavers with spacer nubs still leave a joint of about 1/16"–3/16".
- Gravel base: covers the paving area plus a strip past the edges (6" or the base depth is common practice), so the edge pavers do not sit on the shoulder of the base. Crushed stone shrinks when compacted, so we add 20% to the compacted volume.
- Bedding sand: a 1" screeded layer of coarse concrete sand over the paving area, plus 10% for screeding and low spots.
- Joint sand: from the real joint volume (area × the share of the surface that is joint × the filled depth, which is the paver thickness minus 1/8"). This is why small pavers need many more bags than large slabs.
- Edge restraint: the perimeter minus the edges held by the house or a wall, in 8 ft pieces with a spike about every foot.
pavers = ⌈ area × 144 ÷ ((L + j)(W + j)) × (1 + waste) ⌉
base (cu yd) = base area × depth(in) ÷ 12 × 1.20 ÷ 27 tons = cu yd × 1.4
sand (cu yd) = area × 1" ÷ 12 × 1.10 ÷ 27 tons = cu yd × 1.35 Worked example: a 12 × 16 ft patio against the house
- Area 192 sq ft, 4" × 8" × 2 3/8" pavers, 1/8" joints, 90° herringbone (10%): 192 × 4.297 × 1.10 → 908 pavers.
- Base 4" compacted, extended 6" past the edges: (17 × 13) sq ft × 4/12 × 1.2 = 88.4 cu ft = 3.27 cu yd ≈ 4.58 tons.
- Bedding sand 1": 192 × 1/12 × 1.1 = 17.6 cu ft = 0.65 cu yd (36 bags of 0.5 cu ft).
- Polymeric sand: 4 × 50 lb bags (about 51 sq ft per bag for these joints).
- Edge restraint: perimeter 56 ft − 16 ft along the house = 40 ft, 5 pieces and 41 spikes.
Pavers per square foot by size
| Paver | Per sq ft (1/8" joint) | Per 100 sq ft | 100 sq ft + 10% |
|---|---|---|---|
| 4" × 8" brick / Holland (2 3/8" thick) | 4.3 | 430 | 473 |
| 6" × 6" | 3.84 | 384 | 423 |
| 6" × 9" | 2.58 | 258 | 284 |
| 6" × 12" | 1.94 | 194 | 214 |
| 8" × 8" | 2.18 | 219 | 240 |
| 12" × 12" slab | 0.98 | 98 | 108 |
| 12" × 24" slab | 0.49 | 50 | 55 |
| 16" × 16" slab | 0.55 | 56 | 61 |
| 24" × 24" slab | 0.25 | 25 | 28 |
Base and sand for common patio sizes
4" × 8" pavers, 10% waste, 4" compacted base extended 6" past the edges, 1" bedding sand.
| Patio | Pavers | Base | Bedding sand |
|---|---|---|---|
| 10 × 10 ft (100 sq ft) | 473 | 1.79 cu yd · 2.5 t | 0.34 cu yd · 0.46 t |
| 12 × 12 ft (144 sq ft) | 681 | 2.5 cu yd · 3.5 t | 0.49 cu yd · 0.66 t |
| 12 × 16 ft (192 sq ft) | 908 | 3.27 cu yd · 4.6 t | 0.65 cu yd · 0.88 t |
| 16 × 20 ft (320 sq ft) | 1,513 | 5.29 cu yd · 7.4 t | 1.09 cu yd · 1.47 t |
| 20 × 20 ft (400 sq ft) | 1,891 | 6.53 cu yd · 9.1 t | 1.36 cu yd · 1.83 t |
Base depth by use
| Use | Well-drained soil | Clay soil |
|---|---|---|
| Walkway / garden path (foot traffic) | 4" | 6" |
| Patio (foot traffic, furniture, grill) | 4" | 6" |
| Residential driveway (cars) | 8" | 12" |
| Heavy vehicles (RV, trucks) | 12" | 16" |
Compacted depths; add about 2" where the ground freezes. These are planning figures from common hardscape practice, not an engineered design: heavy vehicles and soft or wet ground need a site-specific base. More in how deep a paver base should be.
Densities vary by quarry: crushed base usually weighs 1.3–1.5 tons per cubic yard and concrete sand 1.3–1.4. Ask the yard for their figure and order a little extra: running short halfway through compaction costs a second delivery fee.