Tile sizes chart
| Nominal size | Typical actual size | Face area | Tiles per sq ft (1/8" joint) | Thickness | Trowel | Used for |
|---|---|---|---|---|---|---|
| 12" × 12" | 300 × 300 mm (11.81") | 1 sq ft | 0.98 | 3/8" | 1/4" × 3/8" square notch | Floors |
| 12" × 24" | 300 × 600 mm (11.81" × 23.62") | 2 sq ft | 0.49 | 3/8" | 1/2" × 1/2" square notch | Floors and walls |
| 24" × 24" | 600 × 600 mm (23.62") | 4 sq ft | 0.25 | 3/8" | 1/2" × 1/2" square notch | Floors |
| 18" × 18" | 450 × 450 mm (17.72") | 2.25 sq ft | 0.44 | 3/8" | 1/2" × 1/2" square notch | Floors |
| 16" × 16" | 400 × 400 mm (15.75") | 1.778 sq ft | 0.55 | 3/8" | 1/4" × 3/8" square notch | Floors |
| 13" × 13" | 330 × 330 mm (13") | 1.174 sq ft | 0.84 | 5/16" | 1/4" × 3/8" square notch | Floors |
| 24" × 48" | 600 × 1200 mm (23.62" × 47.24") | 8 sq ft | 0.12 | 3/8" | 3/4" U-notch (large slabs) | Floors and walls |
| 6" × 24" (wood look) | 150 × 600 mm (5.91" × 23.62") | 1 sq ft | 0.97 | 3/8" | 1/2" × 1/2" square notch | Floors |
| 6" × 36" (wood look) | 150 × 900 mm (5.91" × 35.43") | 1.5 sq ft | 0.65 | 3/8" | 3/4" U-notch (large slabs) | Floors |
| 8" × 48" (wood look) | 200 × 1200 mm (7.87" × 47.24") | 2.667 sq ft | 0.37 | 3/8" | 3/4" U-notch (large slabs) | Floors |
| 3" × 6" subway | 75 × 150 mm (2.95" × 5.91") | 0.125 sq ft | 7.52 | 5/16" | 1/4" × 1/4" square notch | Walls, backsplash |
| 4" × 12" subway | 100 × 300 mm (3.94" × 11.81") | 0.333 sq ft | 2.88 | 5/16" | 1/4" × 3/8" square notch | Walls, backsplash |
| 2" × 8" | 50 × 200 mm | 0.111 sq ft | 8.34 | 5/16" | 1/4" × 1/4" square notch | Walls, backsplash |
| 4" × 4" | 100 × 100 mm (3.94") | 0.111 sq ft | 8.46 | 1/4" | 3/16" × 5/32" V-notch | Walls, backsplash |
| 4 1/4" × 4 1/4" | 108 × 108 mm | 0.125 sq ft | 7.52 | 1/4" | 1/4" × 1/4" square notch | Walls, backsplash |
| 6" × 6" | 150 × 150 mm (5.91") | 0.25 sq ft | 3.84 | 5/16" | 1/4" × 1/4" square notch | Floors and walls |
| 8" × 8" | 200 × 200 mm (7.87") | 0.444 sq ft | 2.18 | 5/16" | 1/4" × 1/4" square notch | Floors and walls |
| 2" × 2" mosaic | 50 × 50 mm on a 12" sheet | 0.028 sq ft | 31.89 | 1/4" | 3/16" × 5/32" V-notch | Shower floors, accents |
| 1" × 1" mosaic | 25 × 25 mm on a 12" sheet | 0.007 sq ft | 113.78 | 1/4" | 3/16" × 5/32" V-notch | Shower floors, accents |
For mosaics, the count is chips per square foot; they are bought by the sheet (about 1 sq ft each).
Nominal vs actual size
The size on the label is a name, not a measurement. A "12 × 24" porcelain tile is usually 300 × 600 mm, 3/16" short on the long side. It matters in two places: planning how many tiles fit along a wall (use the real size) and comparing prices (use the box coverage in square feet, which is computed from the real size).
Rectified, pressed and caliber
- Rectified tiles are ground to an exact size with square edges after firing; they allow tight joints and a modern look.
- Pressed (non-rectified) tiles keep their slightly rounded factory edges and vary a little in size; use wider joints.
- Caliber (or size code) on the box identifies the size batch. Buy all boxes with the same caliber and shade codes.
Choosing a size
- Floors: 12" × 24" or 24" × 24" for most rooms; wood-look planks for a hardwood look; 2" mosaics for sloped shower floors.
- Walls and showers: 3" × 6" or 4" × 12" subway, 12" × 24" for a modern shower, 24" × 48" slabs for few grout lines.
- Long tiles (over 18") should be offset by at most a third of their length to avoid lippage from the slight bow every long tile has.
Calculate how many of any size you need with the tile calculator, which uses the joint and your box coverage.