The area of one room or a whole house for flooring, tile or paint: any shape, several rooms, cutouts for islands and cabinets, with square feet, square yards, square meters and the perimeter for trim.
How do I calculate square footage for flooring or tile?
+
Multiply the length by the width of each room in feet. For an L-shaped room, either split it into two rectangles and add them, or take the full rectangle and subtract the missing corner. Add closets, subtract fixed cabinets or an island, then add 7–20% waste depending on the material and layout before you buy.
How do I convert inches to square feet?
+
Multiply length × width in inches and divide by 144 (12 × 12). A 30" × 60" area is 1,800 ÷ 144 = 12.5 sq ft. Or type the measurements with the inch mark (30") into the calculator: it converts for you.
How many square feet is a 12×12 room?
+
144 sq ft, which is 16 sq yd or 13.38 m². A 10 × 12 room is 120 sq ft, a 12 × 15 room 180 sq ft.
How do I find the square footage of an odd-shaped room?
+
Split it into rectangles, triangles and circles, work out each one, and add them up. For a bay window, add the rectangle of the bay plus the two triangles at its sides. Measure to the wall, not to the baseboard.
Square feet vs square yards vs square meters?
+
Divide square feet by 9 for square yards (how carpet is sold) and multiply by 0.0929 for square meters. 100 sq ft = 11.11 sq yd = 9.29 m².
Do I include closets and the area under appliances?
+
Include closets and anything the floor runs under (a freestanding range, a refrigerator space, a toilet). Exclude permanent cabinets, kitchen islands and built-ins the flooring stops against.
Last reviewed November 22, 2026. How we check our math: About FlooringMath.